Cat7 S/FTP 4 pairs AWG23 APS-Finland
KSh 42,800.00
Cat 7 S/FTP 4 pairs AWG23 APS-Finland
The use of Cat 7 data cabling is increasing rapidly on ships and offshore installations. To meet the demands of the rugged offshore shipping environment our UV resistant & Oil resistant DNV- GL & ABS approved Category 7 cables are available from stock.
Store at: -40 to +60 °C
Install at: -40 to +60 °C, Bend minimum: 5 times O.D.
Operate at: -40 to +60 °C, Bend minimum: 10 times O.D.
Pull maximum: 100N
Design
Conductor: solid bare copper AWG23/1
Insulation: Cellular polyolefin (SFS-PE), nominal Ø 1.38 mm
Pair: No 2 insulated conductors stranded together into a pair
Colour code: 1. White/blue 2.White/orange 3. White/green 4. White/brown (IEC 708-1)
Screen 1: Aluminium/polyester or Aluminium/polyester/aluminium tape over each single pair
Screen 2: overall Tinned Copper Wire Braid
Outer jacket: Grey Fire Retardant and UV Resistant SHF2 material, LSZH
Marking : APS Finland – ww/yy – S/FTP 4x2xAWG23/1 Cat.7 LSZH SHF2 – IEC60332-3-22 Cat A – lot + m
Environmental properties and Fire Performances
Degree of acidity of gases: IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10μS/mm)
Halogen acid gas: IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission: IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas: EN50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Ozone resistant: IEC60811-2-1, DIN VDE 0472 part 805 B
LSZH SHF2 : IEC 60092-360
Oil resistant: IEC60811
Water absorption: IEC60811-1-3
UV resistant: IEC60811-2-1, ASTM-D-2565-92A
Cold bend & impact : CSA C22.2, UL44
Electrical characteristics (IEC 60811, EN 50288-4-2)
Test voltage: 0.7kV a.c. for 1 minute
Resistance of the conductor @ 20°C : ≤ 14,5 /100m
Insulation resistance : ≥ 500 MΩxkm (100V-500V)
Nominal Capacitance @ 800÷1000MHz : 45 pF/m
Average characteristic impedance: 100 ± 15 Ω @ 1-100MHz
Transfer impedance : ≤ 3mΩ/m @ 10MHz
